بحث هذه المدونة الإلكترونية

الخميس، ١٠ مايو ٢٠١٢

how to configure avaya ip phone 1603SW-I BLK1


بسم الله والحمد لله والصلاة والسلام علي رسول الله وآله وصحبه وإخوانه وسلم

 
how to configure avaya ip phone 1603SW-I BLK1



1-connect the power adapter
2-connect the network cable
3-wait till the phone powers up
4- press * to configure the ip phone manually otherwise it will prompt for a DHCP server.
5-when you see this message
----------------------
Enter PROCPSWD:
#=OK
----------------------
press # to continue
6- Phone=0.0.0.0
    New= "insert the ip you will give to this ip phone"
note that * equals . for example to type 10.10.1.12 it will be 10*10*1*12
to delete a number just press - in the volume button
then press # to go to the next step
7- CallSv=0.0.0.0
    New= "insert the ip of the avay call manager "or server"
then press # to go to the next step
8- Router=0.0.0.0
    New= "insert the ip address of the gateway on your lan "router ip address" "
then press # to go to the next step
9- Mask=0.0.0.0
    New= "insert the subnet mask"
then press # to go to the next step
10- FileSv=0.0.0.0
     New= "insert the file server ip address or leave it empty
then press # to go to the next step
11-802.1Q=auto
*=change #=ok  if you have vlans and use trunnking press * to turn 802.1q trunking on otherwise press # to keep it off
press # to proceed
12- Save new values?
*=no #=yes

press # to accept the configuration, you should see this message "new values have been accepted". then the phone will restart
after restart it will ask you for the Extension of this phone,
Enter Extension
Ext= 123 #ok

insert the extension and press # to confirm
then it will ask you for the password\
enter the password supplied by the voip admin then press # to confirm, and you are done.

best regards
Ahmed Mustafa